Metal Materials, The Hard Power of Manufacturing
Metal 3D printing materials directly determine part performance. lantu3D strictly controls powder quality with full material certificates and test reports.
Stainless Steel Series
- 316L: corrosion resistant, high strength, tensile ≥550MPa, elongation ≥30%. Applications: medical, chemical, food equipment
- 17-4PH: precipitation hardening, ≥1100MPa after heat treatment. Applications: tools, molds, structural parts
- 15-5PH: better transverse properties than 17-4PH, for complex stress parts
Aluminum AlSi10Mg
- Lightweight: density 2.67g/cm³, ≥350MPa after heat treatment
- Good thermal conductivity, for heat sinks and exchangers
- Applications: automotive, aircraft interiors, enclosures, brackets
Titanium Ti6Al4V
- High specific strength: density 4.43g/cm³, tensile ≥1050MPa
- Corrosion resistant, biocompatible (ASTM F136 medical grade)
- Applications: aerospace structures, medical implants, racing parts
Inconel Superalloys
- Inconel 718: heat resistant 650°C, corrosion resistant. Applications: gas turbines, engines
- Inconel 625: excellent corrosion resistance. Applications: chemical, marine
Cobalt-Chrome
- High hardness (HRC 35-45), wear resistant, biocompatible
- Applications: dental restorations, artificial joints, high-temp bearings
Next Step
Is this close to what you need?
Submit a model, drawing, image or written notes. Engineers will review material, process, finishing and delivery based on actual use.